MACHINING CENTER FOR 3D PRECISION ENGRAVING AND MOULDS, MODELS, ELECTRODES OR PUNCHES REALIZATION
EQUIPMENT OPTIMIZED FOR THE MACHINING OF FOLLOWING MATERIALS :
. Aluminium
. Synthetic resins
. Steel
. Brass and copper alloys
. Plastics and composites
. Graphite
AVAILABLE SIZES :
| Models |
X travel mm |
Y travel mm |
Z travel mm |
| TR 64 |
400 |
600 |
300 |
| TR 1012 |
1020 |
1200 |
500 |
TECHNOLOGIES :
. Kinematic unit with fixed table and mobile gantry.
. Steel welded frame.
. Steel welded mobile gantry
. Vacuum table in aluminium profiles or composite
. Holding of plates by vacuum generated either by lateral canal turbines or by vacuum claw pumps. Selection of zones with manual valves.
. Motorisation by AC Brushless servomotors on the 4 axes (X1-X2-Y-Z), double driving on X axis.
. Transmission by precision ball screws on all axes.
. Guidance : precision linear rails with preloaded ball slides.
. POWER AUTOMATION MECANUMERIC CN7000 numerical control with touch screen 15 inches Integrated hard disk, Ethernet port, USB port. Import of files in ISO codes.
. Complete fairing of the equipment with sliding front doors.
. High kinematic to avoid abrasion due to the chips.
Available Electrospindles :
| Type |
Max Rotation |
Power |
Cooling |
Tool change |
Collet |
Cone |
| SEV1090 |
24000 RPM |
4500 W |
Air |
Manual |
ER32 (1 to 20 mm) |
|
| ES919 |
28000 RPM |
7500 W |
Air |
Automatic |
ER32 (1 to 20 mm) |
ISO30 |
| D65 |
40000 RPM |
6500 W |
Water |
Automatic |
EX25 (1 to 13 mm) |
HSK E32 |
| D15 |
24000 RPM |
15000 W |
Water |
Automatic |
EX32 (1 to 20 mm) |
HSK F63 |
| HF80 |
40000 RPM |
2500 W |
Water |
Automatic |
EX20 (1 to 10 mm) |
SKI20 |
MAIN FEATURES :
. Maximum speed : 417 mm/sec on TR1012 and 300 mm/sec on TR64
. Acceleration : 1 ms²
. Repeatability : +/-0.025 mm to 20° C
. Resolution : 0.001 mm
OPTIONS :
. Chip suction by industrial suction unit - power 2200W (ASP22), 4000 W (ASP40) or 7500 W (ASP75) with high capacity tank and manual or automatic declogging.system.
. Vacuum table with 2 turbines SIEMENS NASH ELMO ® with lateral canal 2.2 kW, 310 m3/h, vacuum 190 mbars or by one turbine SIEMENS NASH ELMO ® with latéral canal 5.5 kW, 900 m3/h, vacuum 190 mbars, only for TR1012.
. Vacuum table by 1 to 2 vacuum claw pumps BUSCH® 4.5 KW 250 m3/h vacuum 880 mbars with surge tanks and safety vacuum switches (only for TR1012).
. Static tool shop 4, 6, 10 or 12 cones
. Rotative tool shop 6 or 12 cones (only for TR1012).
. Tool lubrication system by oil spraying – capacity 2 l/h tank 6 liters (LUB2) or high capacity 6 l/h, tank 40 liters (LUB6).
. Cooling system tool/material by cold air (AIRGEL).
. Horizontal numerical divisor (4th axis).
. SIEMENS SINUMERIK® 840 Di numerical control and SIEMENS servomotors (only for TR1012).
. Electronic handle.
Download the PDF file :
