Edge polishing equipment with numerical control :
High productivity system for perfect edge polishing of plate materials in the sectors of decoration, POP, gift items or trophy.
Materials to be used (according to the selected tool) :
- Plastic in rigid plates (PMMA-PC-..)
- Resin
AVAILABLE SIZES :
|
Model
|
Working area X mm
|
Working area Y mm
|
Working travel Z mm
|
Working passage under clamping mm
|
|
MD1600L
|
1600
|
0
|
35
|
110
|
|
MD2100L
|
2100
|
0
|
35
|
110
|
|
MD3100L
|
3100
|
0
|
35
|
110
|
|
MD2104XY
|
2100
|
340
|
50
|
450
|
TECHNOLOGIES :
- Equipment with fix table and moving tool.
- High inertia steel welded frame, stabilized, table in rectified steel, thickness 25mm.
- Spindle support carriage moving, in cast iron to better absorb vibrations
- Material held by pneumatic clamping with 5 (and up to 12) heavy jacks (50 mm) assembled on carriages guided by grinded rails and preloaded ball bearings, fast positioning by bevels - Tightening bearings whir boned +/- 15° - The system is assembled on a high inertia girder in welded and machined steel Grinded adjusting system. Movement by double pneumatic jack, double guiding by grinded steel rails and 4 preloaded ball bearings. Lateral opening for oversized plates on MD1600L et MD2100L
- Grinded adjusting system. Movement by double pneumatic jack, double guiding by grinded steel rails and 4 preloaded ball bearings.
- AC Brushless servomotors 750W each on 2 axes (XZ)
- Transmission by high precision ballscrews on X and Z axes.
- Grinded rails and preloaded ball bearings .
- Numerical control with 5 inches color touch screen, easy programmation of all parameters in digital (linear speed, pass depth, length travel, spindle rotation speed, return speed, number of pass…). Automatical and manual cycles.
- High frequency spindle, low noise level, with continuous electronic speed variation.
- Active safeties by covers and immaterial enclosure
- Integrated electrical cabinet
- Balanced tool holder for 4 fast assembly cartridges
- Natural diamond or synthetical polycristaline (PCD) tools, assembled in cartridges for fast change. Polishing and satinating tools.
- Polishing and satinating tools.
AVAILABLE HEADS :
- Horizontal electrospindle:
- MT1090 : 12000 RPM maximum – 3900 W S1, air cooling – Spindle adapted to receive 120 mm tool holders (working length).
PERFORMANCES :
- Maximum speed : 3000 mm/sec
- Max. fast return speed : 12000 mm/min
- Acceleration : 0.5 ms²
- Repeatability Z travel : +/-0.02 mm, X or Y travels : +/- 0.05 mm
- Resolution : 0.001 mm
OPTIONS :
- Suction of milling chips by professional suction device – power 4000 W (ASP40) or 7500 W (ASP75) with high flow reception tank and manual or automatic unclogging system.
- Tool / material cooling system by frozen air spray (AIRGEL)
- Ball table for material support, assembled on grinded steel slides and guiding ball bearings
- Head dipping 0 up to 60°on MD2104XY.
Download the PDF file :
