Fixed table, mobile gantry, 4 cartesian axes, 2 polar axes
A question ? An offer ? Express inquiry
MILLING EQUIPMENT OPTIMIZED FOR THE MACHINING OF BIG FORM PARTS REALIZED BY THERMOFORMING PROCESS IN FOLLOWING MATERIALS:
. Plastics and composites
. Synthetic resins
. PU and PS foams
. Wood and by-products
. Aluminium
. Brass and alloys
AVAILABLE SIZES:
Model | X travel mm | Y travel mm | Z travel mm |
T2515 | 3100 | 2100 | 870 |
TECHNOLOGY:
. Transmission by ball screws on the 4 cartesian axes (X1, X2, Y, Z)
. 2 rotative axes (C : +/- 200° and A : +/- 200° as per electrospindle)
. Many electrospindles available
Numerical control and motorization
• SIEMENS SINUMERIK 840DI numerical control : X, Y, Z, C, A.axes
Colour screen STN 10.4 inches OP010.
Brushless motorisation type 1FK7 with numerical variators.
Air-conditioned electric cabinet.
• SIEMENS SINUMERIK 840D numerical control : X, Y, Z, C, A.axes
Colour screen STN 10.4 inches OP010.
Brushless motorisation type 1FT6 with numerical variators.
Air-conditioned electric cabinet.
• NUM 1050 DIGITALE numerical control : X, Y, Z, C, A.axes
Flat screen TFT 12 inches.
Operator console MP03.
Brushless motorisation BPH with numerical variators.
Air-conditioned electric cabinet.
MAIN FEATURES:
. Speed in mm/sec: 650
. Resolution in mm: +/- 0,05
. Repeatability in mm: +/- 0,025 à 20°C
OPTIONS:
. Front and back automatic doors
. Mobile wall for pendular work (manual or automatic)
. Vacuum table for parts or tool holding (vacuum technology by turbines with side canal or vacuum pump)
. Static tool shop (6,10,15 tools)
. Tool measurement sensor
. Sound proofed complete fairing
. Other working areas