Fixed table, mobile laser, average power. Sealed laser sources from 100 to 600W enable to get a very low operating cost because these laser do not require exterior laser gas and they have a life time of 15000 to 18000 hours, before any gas reloading.
CUTTING EQUIPMENT OPTIMIZED FOR MACHINING OF FOLLOWING MATERIALS WITH
STANDARD FOCUSING HEADS :
. Plastic materials
. Wood and by-products
THE UTILIZATION OF A FOCUSING HEAD WITH HIGH PRESSURE LENS GIVES THE POSSIBILITY
TO CUT IN ADDITION :
. Soft steel : thickness 4 mm with 300W, 6 mm with 600W
. Stainless steel : thickness 1,5 mm with 350W, 3 mm with 600W
Fast, rigid and accurate equipment, three available sizes in standard
. Transmission by 4 ball screws (2 ball screws on X axes), numerical Z axis
. Motorisation : 4 DC servomotors with continuous current
. Guidance : precision linear rails with preloaded ball slides
. Numerical control : Power Automation MECANUMERIC CN7000, ISO code
. Sealed CO2 laser driven under mobile gantry and only one reversing mirror towards the focusing head : easy maintenance and low operating cost.
. FOMEC focusing head : focus lens 2,5 or 5 inches with coaxial suction
. Fume suctions by table divided into sectors with automatic zone selection
. Standard table in anodized aluminium bars and anti reflecting profiles
. Numerous CO2 laser sources available
MAIN FEATURES :
. Maximum speed in mm/sec : 250
. Passage under gantry in mm : 185
. Resolution in mm : 0,005
. Repeatability in mm : +/-0,05 to 20° C
. Vision registration/compensation system by camera (GTK, OPTISCOUT)
. PRECITEC high pressure focusing head PRECITEC for steel cutting.
. Filtration system and fume treatment.
. Aluminium honeycomb special tables.
. Interchangeable tables for loading / unloading in concealed time.
. Automatic compensation system of flatness defects.
. SIEMENS numerical control and SIEMENS servomotors.
. Complete safety enclosure.