MÉCANUMÉRIC actions in favour for a sustainable development (September, 2021)

For almost 30 years, MÉCANUMÉRIC has been committed to preserve the resources of our planet. This is why in recent years the company has stepped up actions to go further in protecting the environment.

The company’s move to its new 13,000 m² factory in 2019 marked an important turning point to its commitment in favour for a sustainable development.

The first step towards the green grow was MÉCANUMÉRIC’s subscription to 2 green contracts with ENGIE (French energy supplier) :

  • A “GAS COMPENSATED CO2” contract that allows the financing of projects meant to avoid CO2 emissions up to those emitted by the company.
  • A “GREEN ELECTRICITY” contract that allows to benefit from a 100% renewable electricity.

Prior to the company’s move, production equipment (oven, cabins, machining centre, etc.) were carefully chosen to optimise internal flows, energy consumption and minimize waste.

All the waste from the production of machines is also sorted, recovered, destroyed or upgraded: cardboard, plastics, aluminium, steel, cast iron, bronze, electric cables, motors, powder paints, wood pallets, used oils, soluble oils, cartridges and toner, cells and batteries, light bulbs and neon ...

Hot drinks are cheaper for employees who use their own cups or mugs and thus avoid the waste of disposable cups - a small gesture, but which is quite important to limit plastic waste.

Other projects are under study within the company:

  • Installation of a composter (cutted grass + organic waste from refectories)
  • Collecting rainwater to fill the tanks of waterjet cutting machines
  • Wood and plastic shredder
  • Compaction of aluminium or steel chips

At the same time and thanks to its design offices (mechanics, electronics and automation), MÉCANUMÉRIC is able to offer exclusive innovations to its customers for the cutting machines that consume less energy and which work for the preservation of the environment:

  • Powerful variable vacuum plate
  • Decantation and filtration of wastewater
  • Suction and filtration of mists ...

Do not hesitate to contact our teams to find out more!

MÉCANUMÉRIC is continuing its development plan (nov. 2017)

MÉCANUMÉRIC is continuing its development plan (nov. 2017)

After reorganizing its capital structure in 2016, the company is advancing on its next project : the relocating of its head office and production activities on the area Eco2Rieumas at Marssac-sur-Tarn, right next to Albi, with a privileged access to the A
New building : it’s ON !  (March 2018)

New building : it’s ON ! (March 2018)

A few month after the building permit, the construction of the new plant has just started ! The 35 000 sq. m plot, located in the Eco2 Rieumas area is very close to Albi and will offer MÉCANUMÉRIC privileged access to the A68 highway and to Toulouse metro
BPI France chose MÉCANUMÉRIC for its program « Accélérateur PME » (SME Accelerator) (nov. 2017)

BPI France chose MÉCANUMÉRIC for its program « Accélérateur PME » (SME Accelerator) (nov. 2017)

MÉCANUMÉRIC has just been selected to integrate the 4th promotion of the « Accélérateur PME » (SME accelerator) program by BPI France.
MECANUMERIC, a new offer for the « makers » (sept. 2017)

MECANUMERIC, a new offer for the « makers » (sept. 2017)

MECANUMERIC, through its CharlyRobot product line, offers a range of machines for the « makers » sector (FabLab, TechShop...) on its main three technologies : milling, waterjet and laser.